Conference Presentations

CO2 Capture

  1. “N2O solubility and N2O diffusivity of aqueous 4-(diethylamino)-2-butanol”, The 60th Canadian Chemical Engineering Conference, October 24-27, 2010, Saskatoon, Canada (T. Sema, M. Edali, A. Naami, R. Idem, P. Tontiwachwuthikul).
  2. “Screening of chemical solvents used for carbon dioxide capture based on their kinetics using a stopped-flow technique”, The 60th Canadian Chemical Engineering Conference, October 24-27, 2010, Saskatoon, Canada (V.A. Rayer, A. Henni, P. Tontiwachwuthikul).
  3. “Capacity of chemical solvents used for the absorption of carbon dioxide: a group additivity and molecular connectivity analysis”, The 60th Canadian Chemical Engineering Conference, October 24-27, 2010, Saskatoon, Canada (V.A. Rayer, A. Henni, P. Tontiwachwuthikul).
  4. “Comparative mass transfer performance studies of CO2 absorption into aqueous solutions of a primary amine and two tertiary amines”, The 60th Canadian Chemical Engineering Conference, October 24-27, 2010, Saskatoon, Canada (A. Naami, M Edali, T. Sema, R. Idem, P. Tontiwachwuthikul).
  5. “Degradation and corrosion studies within chlorides and sulphurous acid systems in MEA-based CO2 capture process”, The 60th Canadian Chemical Engineering Conference, October 24-27, 2010, Saskatoon, Canada (P. Wattanaphan, R. Idem, P. Tontiwachwuthikul).
  6. “Simulation of the effects of lean loading, and flue gas temperature (with and without a saturator) on energy requirements for absorption of CO2 in 30wt.% MEA solution using promax2.0”, The 58th Canadian Chemical Engineering Conference, October 20-22, 2008, Ottawa, Canada (Z. Liang, P. Tontiwachwuthikul, R. Idem).
  7. “A decision support system for monitoring and diagnosis of carbon dioxide capture”, ISEIS 6th International Conference on Environmental Informatics, November 21-23, 2007, Bangkok, Thailand (Q. Zhou, C. Chan, P. Tontiwachwuthikul).
  8. “Statistical modeling and analysis of data from a carbon dioxide capture process”, The 57th Canadian Chemical Engineering Conference, October 28-31, 2007, Edmonton, Alberta, Canada (Q. Zhou, C. Chan, and P. Tontiwachwuthikul).
  9. “A carbon dioxide capture data analysis support system”, Canadian Conference on Electrical and Computer Engineering(CCECE ’07) (R. Harrison, Y. Wu, H. Nguyen, X. Li, D. Gelowitz, W. Chan, P. Tontiwachwuthikul).
  10. “An integrated approach framework for developing intelligent monitoring, diagnosis and supervisory control system of process control industries”, The CCECE 05, The IEEE 2005 Canadian Conference on Electrical and Computer Engineering, May 1-4, 2005, Saskatoon, Canada (V. Uraikul, C.W. Chan, P. Tontiwachwuthikul).
  11. “MILP model for compressor selection in natural gas pipeline operations”, Conference of International Society for Environmental Information Sciences- 2004 Annual Conference (ISEIS’04), Aug 25-27, 2004, p. 03-082, Regina, Canada (V. Uraikul, C.W. Chan, P. Tontiwachwuthikul).
  12. “An architectural framework for a distributed information system in process control industries”, Proceedings of IEEE Canadian Conference on Electrical and Computer Engineering (IEEE CCECE 2004), May 2-4, 2004, p.1375-1378, Niagara, Ontario, Canada (V. Uraikul, C.W. Chan, P. Tontiwachwuthikul).
  13. “Kinetics of the reactive absorption of carbon dioxide into a mixed aqueous solution of CO2-loaded monoethanolamine and methyldiethanolamine, The 53rd CSChE Conference, October 27-29, 2003, Hamilton, Canada (P. Tontiwachwuthikul and N. Ramachandran).
  14. “Solubility of CO2, methane and ethane in fourteen promising physical solvents”, The 18th International Pittsburgh Coal Conference, December 4-7, 2001, Newcastle, Australia (A. Henni, P. Tontiwachwuthikul, A. Chakma).
  15. “Modeling of the solubility of natural gas components in polyethylene glycol alkyl ethers”, The 51st Canadian Chemical Engineering Conference, October 14-17, 2001, Halifax, Canada (A. Henni, P. Tontiwachwuthikul, A. Chakma).
  16. “Performance of organic corrosion inhibitors for CO2 absorption process” The International Symposium on Separation and Purification held in conjunction with the 49th Canadian Chemical Engineering Conference, October 3-6, 1999, Saskatchewan, Canada (A. Veawab, P. Tontiwachwuthikul).
  17. “Efficiency comparison of CO2 absorption using single and mixed alkanolamines in packed columns” The International Symposium on Separation and Purification held in conjunction with the 49th Canadian Chemical Engineering Conference, October 3-6, 1999, Saskatchewan, Canada (A. Aroonwilas, A. Veawab, P. Tontiwachwuthikul).
  18. “Mass transfer in structured packing for CO2 separation”, AIChE Spring Meeting, March 1999, Houston, USA ( Aroonwilas, A. Veawab, P. Tontiwachwuthikul, A. Chakma).
  19. “CO2 absorption solvents and corrosiveness”, AIChE Spring Meeting, March 1999, Houston, USA (A. Aroonwilas, A. Veawab, P. Tontiwachwuthikul, A. Chakma).
  20. “Carbon oxide production from coal-fired power plants for EOR applications”, Canadian Electric Association Conference, April 1998, Toronto, Canada (P. Tontiwachwuthikul, C.W. Chan).
  21. “Important factors affecting CO2 removal efficiency by using ultra high concentration MEA”, 1998 International Gas Technology Symposium-SEP, March 1998, Calgary, Canada (P. Tontiwachwuthikul, A. Adoudheir).
  22. “Densities and viscosities of triethylene glycol monomethyl ether + water solutions”, The 48th Canadian Chemical Engineering Conference, October 1998, Ontario, Canada (P. Tontiwachwuthikul, A. Henni).
  23. “Overall mass transfer coefficient for packed columns using ultra-high MEA solutions”, The 48th Canadian Chemical Engineering Conference, October 1998, Ontario, Canada (P. Tontiwachwuthikul, D. deMontigny).
  24. “Waste management and planning through an inexact optimization approach”, 1997 International Conference on Pollution Prevention and Control, November 1997, Bangkok, Thailand (G. Huang, A. Chakma, P. Tontiwachwuthikul).
  25. “Cogeneration-clean technology for producing electricity, heat and industrial gas”, 1997 International Conference on Pollution Prevention and Control, November 1997, Bangkok, Thailand (P. Tontiwachwuthikul).
  26. “Mass transfer parameter estimations using optimization techniques: case studies in CO2 separation processes”, The 47th Canadian Chemical Engineering Conference, October 5-8, 1997, Edmonton, Canada (J. Ji, W. Kritpiphat, P. Tontiwachwuthikul).
  27. “Modeling and simulation of water supply pipeline network systems”, The 47th Canadian Chemical Engineering Conference, October 5-8, 1997, Edmonton, Canada (W. Kritpiphat, C.W. Chan, P. Tontiwachwuthikul).
  28. “Kinetics of CO2 absorption in mixed solvents: a comprehensive review”, The 47th Canadian Chemical Engineering Conference, October 5-8, 1997, Edmonton, Canada (A. Henni, A. Chakma, P. Tontiwachwuthikul).
  29. “Intelligent systems for natural gas pipeline operations”, The 47th Canadian Chemical Engineering Conference, October 5-8, 1997, Edmonton, Canada (C.K. Sun, C.W. Chan, P. Tontiwachwuthikul).
  30. “Behavior of CO2-AMP absorption with reaction in packed columns”, The 47th Canadian Chemical Engineering Conference, October 5-8, 1997, Edmonton, Canada (A. Adoudheir, A. Chakma, P. Tontiwachwuthikul).
  31. “A feasibility study on simultaneous production of electricity, steam and CO2 from co-generation plants for enhanced oil recovery in western canada”, The 4th International Horizontal Well Workshop, May 5-7, 1996, Bismarck, North Dakota, USA (P. Tontiwachwuthikul, D. deMontigny).
  32. “Intelligent system for monitoring and control of the municipal network pipeline at the city of regina”, Access Day held in conjunction with Multimedia Conference, Telecommunications Research Laboratory (TRLabs), August 22, 1995, Saskatoon, Canada (C.W. Chan, A. An, W. Kritpiphat, N. Cercone, P. Tontiwachwuthikul).
  33. “A case study of carbon dioxide production for enhanced oil recovery from coal-fired power plants: Saskatchewan perspectives” The 46th Annual Technical Meeting of the Petroleum Society of CIM, May 14-17, 1995, Banff, Alberta, Canada (P. Tontiwachwuthikul, C.W. Chan).
  34. “Intelligent monitoring of a municipal water supply system”, The Proceedings of NACE International-Canadian Western Regional Conference, February 19-22, 1995, Regina, Canada (C.W. Chan, A. An, W. Kritpiphat, N. Cercone, P. Tontiwachwuthikul).
  35. “A cost study of carbon dioxide production from coal-fired power plants in canada”, The 1995 International Chemical Congress of Pacific Basin Societies”, December 17-22, 1995, Honolulu, USA (P. Tontiwachwuthikul, C.W. Chan).
  36. “Investigation of corrosion and corrosion control in carbon dioxide absorption using a new solvent-AMP”, Proceedings of NACE International-Canadian Western Regional Conference, February 19-22, 1995, Regina, Canada (A. Veawab, S.D. Bhole, P. Tontiwachwuthikul).
  37. “CO2 absorption in a sterically hindered amine-AMP: a review”, The Gas Processing Symposium (in conjunction with the 44th Canadian Chemical Engineering Conference), October 3-5, 1994, Calgary, Canada (P. Tontiwachwuthikul).
  38. “Solvent screening for carbon dioxide absorption”, The Gas Processing Symposium (in conjunction with the 44th Canadian Chemical Engineering Conference), October 3-5, 1994 Calgary, Alberta (D. Skoropad, Kritpiphat, P. Tontiwachwuthikul).
  39. “Real time expert system for reservoir monitoring and control in a water distribution system” in the 44th Canadian Chemical Engineering Conference, October 3-5, 1994, Calgary, Alberta (C. Chan, A. An, N. Cercone, P. Tontiwachwuthikul).
  40. “Model for developing an expert system in chemical process operations” The 44th Canadian Chemical Engineering Conference, October 3-5, 1994, Calgary, Canada (W. Gao, C.W. Chan, P. Tontiwachwuthikul).
  41. “Modeling CO2 absorbers using a sterically hindered amine”, The 41st Canadian Chemical Engineering Conference, October 6-9, 1991, Vancouver, Canada (A. Meisen, C.J. Lim, P. Tontiwachwuthikul).
  42. “Expert system for selection of chemical solvents for CO2 removal processes”, The 41st Canadian Chemical Engineering Conference, October 6-9, 1991, Vancouver, Canada (C.W. Chan, N. Cercone, P. Tontiwachwuthikul).
  43. “Heat and mass transfer in wood chips”, Wood Pulp Network: Process Control Workshop (sponsored by Networks of Center of Excellence), Pulp and Paper Centre, PAPRICAN, May 2-3, 1991, Vancouver, Canada (P. Tessier, P. Tontiwachwuthikul).
  44. “Review of designing acid gas absorbers with chemical reaction”, The 40th Canadian Chemical Engineering Conference, July 15-21, 1990, Halifax, Canada (A. Meisen, C.J. Lim, P. Tontiwachwuthikul).
  45. “Separation of CO2 using sterically hindered amine solutions”, Proceedings of the International Conference and Exhibition on Recent Developments in Petrochemical and Polymer Technologies, December 12-17, 1989, Bangkok, Thailand (A. Meisen, C.J. Lim, P. Tontiwachwuthikul).
  46. “Concentration and temperature profiles in a packed absorber removing CO2 from air by NaOH and monoethanolamine solutions”, The 38th Canadian Chemical Engineering Conference, October 2-5, 1988, Edmonton, Canada (A. Meisen, C.J. Lim, P. Tontiwachwuthikul).
  47. “Pilot plant studies for design of gas absorbers with chemical reaction”, The 3rd Chemical Congress of North America and 195th American Chemical Society Meeting, Symposium on Scale-up of Industrial Chemical Processes, June 6, 1988, Toronto, Canada (A. Meisen, C.J. Lim, P. Tontiwachwuthikul).
  48. “Comprehensive mass transfer and reaction kinetics studies of a novel reactive 4-diethylamino-2-butanol solvent for capturing CO2”, The 11th International Conference on Gas-Liquid & Gas-Liquid-Solid Reactor Engineering (In conjunction with The 9th World Congress of Chemical Engineering), August 19-22, 2013,COEX, Seoul, Korea ( Sema, A. Naami, K. Fu, G. Chen, Z. Liang, R. Idem, P. Tontiwachwuthikul).
  49. “Investigation of purification systems for MEA/MDEA solvent used in CO2 capture system, The 62nd Canadian Chemical Engineering Conference, October 14-17, 2012, Vancouver, BC, Canada (W. ElMoudir, R. Idem).
  50. “Kinetics of the reactive absorption of carbon dioxide into a mixed aqueous solution of CO2-loaded monoethanolamine and methyldiethanolamine”, The 53rd CSChE Conference, October 27-29, 2003. Hamilton, Canada ( Idem, N. Ramachandran).
  51. “Applications of new absorption kinetics and vapor/liquid equilibrium models to simulation of a pilot plant for carbon dioxide absorption into high CO2-loaded, concentrated monoethanolamine solutions”, The 7th International Conference and Exhibition on Chemistry in Industry (CHEMINDIX), March 26-28, 2007, Bahrain ( Aboudheir, P. Tontiwachwuthikul, R. Idem).
  52. “Kinetic study of SO2 and O2 induced degradation of aqueous MEA”, The 7th International Conference and Exhibition on Chemistry in Industry (CHEMINDIX), March 26-28, 2007, Bahrain (R. Idem, I.J. Uyanga, A. Aboudheir, P. Tontiwachwuthikul).
  53. “Pathways and reaction products for the oxidative degradation of CO2 loaded and concentrated aqueous MEA and MEA/MDEA mixtures during CO2 absorption from flue gases”, The 7th International Conference on Greenhouse Control Technologies (GHGT-7), September 5-9, 2004, Vancouver, BC, Canada, (O. A. Lawal, A. Bello, R. Idem).
  54. “Evaluation of the CO2 capture performance of the University of Regina CO2 technology development plant and the boundary dam CO2 demonstration plant”, The 7th International Conference on Greenhouse Gas Control Technologies, September 5-9, 2004 Vancouver, BC, Canada (M. Wilson, P. Tontiwachwuthikul, R. Idem, A. Veawab, A. Aroonwilas, D. Gelowitz, A. Chakma, J. Barrie, B. Stobbs).
  55. “Role of methyldiethanol-amine (MDEA) in the prevention of the oxidative degradation of CO2-loaded and concentrated aqueous MEA-MDEA blends during CO2 absorption from flue gases”, The 54th Canadian Chemical Engineering Conference, October 3-6, 2004, Calgary, Alberta, Canada (A.O. Lawal, Idem).
  56. “Mechanism of the oxidative degradation of CO2-loaded and concentrated aqueous monoethanol-amine (MEA) with sodium metavanadate during CO2 absorption from flue gases, The 54th Canadian Chemical Engineering Conference, October 3-6, 2004, Calgary, Alberta, Canada (A. Bello, R. Idem).
  57. “Kinetics of the reactive absorption of carbon dioxide into a mixed aqueous solution of CO2-Loaded monoethanolamine and methyldiethanolamine within the temperature range 298-333K”, The 53rd Canadian Chemical Engineering Conference, October 26-29, 2003, Hamilton, ON, Canada, (N. Ramachandran, A. Aboudheir, P. Tontiwachwuthikul. and R. Idem).
  58. “International test centre for carbon dioxide capture (ITC)”, The 6th International Conference on Greenhouse Gas Control Technologies, October 1-4, 2002, Kyoto, Japan (M. Wilson, P. Tontiwachwuthikul, A. Chakma,R. Idem, A. Veawab, A. Aroonwilas, D. Gelowitz).
  59. “Applications of a simplified vapour-liquid equilibrium model for CO2 Absorption into MEA solutions”, Thermodynamics-2003 Conference, April 9-11, 2003, Cambridge, UK (A. Aboudheir, P. Tontiwachwuthikul, A. Chakma, R. Idem).
  60. “Challenges of recommissioning a CO2 capture pilot plant in saskatchewan, Canada”, The 6th International Conference on Greenhouse Gas Control Technologies, October 1-4, 2002, Kyoto, Japan (D. Skoropad, D. Gelowitz, R. Idem, R. Stobbs, J. Barrie).
  61. “Test results from a CO2 extraction pilot plant at boundary dam coal-fired power station”, The 6th International Conference on Greenhouse Gas Control Technologies, October 1-4, 2002 Kyoto, Japan (M. Wilson, P. Tontiwachwuthikul, A. Chakma,R. Idem, A. Veawab, A. Aroonwilas, D. Gelowitz).

 

 

CO2 Utilization and Production of Hydrogen & Syngas

  1. “Kinetic study of catalytic partial oxidation (CPOX) of synthetic diesel over Ni-based mixed oxide catalyst in a packed bed tubular reactor”, The 19th World Hydrogen Energy Conference, ON, June 3-7, 2012, Toronto, Canada (R. Idem).
  2. “Hydrogen production via steam reforming of mixtures of oxygenated hydrocarbons over Ni/CeZrMOx catalysts”, The 19th World Hydrogen Energy Conference, June 3-7, 2012, Toronto, Canada (R. Idem).
  3. “Hydrogen production from fossil and biomass fuels: catalyst development, kinetics, and reactor modeling”, The 7th International Conference and Exhibition on Chemistry in Industry (CHEMINDIX), March 26-28, 2007, Bahrain (A. Aboudheir, R. Idem).
  4. “Evaluation of the performance of Ni-supported on CeO2, La2O3, ZrO2 and their combinations for production of hydrogen by partial oxidation of synthetic gasoline”, Hydrogen and Fuel Cells 2007 International Conference, April 29-May 2, 2007, Vancouver, Canada ( H. Ibrahim, R. Idem).
  5. “Hydrogen production by partial oxidation of diesel over Ni-supported catalysts: effects of CeO2, La2O3, ZrO2, Al2O3 and CeO2-ZrO2 supports”, Hydrogen and Fuel Cells 2007 International Conference, April 29-May 2, 2007, Vancouver, Canada ( Okochi, R. Idem).
  6. “Kinetic and reactor modeling of the catalytic reforming of crude ethanol over a nickel-based commercial catalyst in a packed-bed reactor for hydrogen production”, Hydrogen and Fuel Cells 2007 International Conference, April 29-May 2, 2007, Vancouver, Canada ( R.Akpan, A. J. Akande, A. Aboudheir, R. Idem).
  7. “Two-dimensional, isothermal, multi-component model for a polymer electrolyte membrane fuel cell”, Hydrogen and Fuel Cells 2007 International Conference, April 29-May 2, 2007 ,Vancouver,Canada ( Mahinpey, A. Jagannathan, R. Idem).
  8. “Reactor modeling and simulation for hydrogen production by carbon dioxide reforming of methane in a fixed-bed reactor”, NHA Annual Hydrogen Conference 2007, March 18-22, 2007 San Antonio (R. Idem).
  9. “Experimental and modeling study of the production of hydrogen from the catalytic reforming of crude ethanol (CRCE) over a Ni-based commercial catalyst in a packed-bed tubular reactor”, NHA Annual Hydrogen Conference 2007, March 18 – 22, 2007, San Antonio (R. Idem).
  10. “Hydrogen production by reforming of concentrated crude ethanol using a homemade Ni/Al2O3 catalyst and a commercial Ni-based catalyst”, NHA Annual Hydrogen Conference 2007, March 18 – 22, 2007, San Antonio (R. Idem).
  11. “Catalyst stability and kinetic studies of hydrogen production by carbon dioxide reforming of methane”, NHA Annual Hydrogen Conference 2007, March 18-22, 2007, San Antonio (R. Idem).
  12. “New kinetics and reactor modeling of a high temperature water-gas-shift reaction for hydrogen production from reformate gas in a packed bed tubular reactor”, NHA Annual Hydrogen Conference 2007, March 18-22, 2007, San Antonio (R. Idem).
  13. “Integration of activated carbon injection for mercury control with amine scrubbing for CO2 removal from lignite flue gas”, Electric Utility Environment Conference (EUEC), January 21-24, 2007, Tucson, Arizona, USA (D. Smith, S. Podwin, C. Nelson, R. Idem, D. Gelowitz, Laudal).
  14. “Kinetics and reactor modeling of a high temperature water-gas-shift (WGS) reaction for hydrogen production from reformate gas in a packed bed tubular reactor and a packed bed membrane reactor”, World Hydrogen Energy Conference, June 13-16, 2006, Lyon, France (P. Kumar, A. Aboudheir, R. Idem).
  15. “Hydrogen Production by Catalytic Reforming of Crude Ethanol over a Commercial Catalyst in Packed Bed Tubular Reactor”, World Hydrogen Energy Conference, June 13-16, 2006, Lyon, France (A. Aboudheir, A.J. Akande, R. Idem).
  16. “Hydrogen production by partial oxidation of isooctane over a nickel-based catalyst in packed bed tubular reactor and packed bed membrane reactor”, World Hydrogen Energy Conference, June 13-16, 2006, Lyon, France (H. H. Ibrahim, A. Aboudheir, R. Idem).
  17. “Kinetics and reactor modeling of a high temperature water-gas-shift (WGS) reaction for hydrogen production from reformate gas in packed bed tubular reactor”, NHA Annual Hydrogen Conference, March 12-16, 2006, Long Beach, CA, USA ( Kumar, A. Aboudheir, R. Idem).
  18. “Hydrogen production by partial oxidation of diesel using Ni/Al2O3 catalyst”, NHA Annual Hydrogen Conference, March 12-16, 2006, Long Beach, CA, USA (N. Okochi, A. Aboudheir, Idem).
  19. “Hydrogen production by catalytic reforming of crude ethanol over a commercial catalyst in packed bed tubular reactor and packed bed membrane reactor”, NHA Annual Hydrogen Conference, March 12-16, 2006, Long Beach, CA, USA (A. Aboudheir, A. J. Akande, R. Idem).
  20. “Kinetic modeling of hydrogen production by the catalytic CO2 reforming of CH4”, The 19th Canadian Symposium on Catalysis, (Poster), 2006, Saskatoon, Canada (Y. Sun, H.H. Ibrahim, R. Idem).
  21. “Experimental and kinetic modeling of hydrogen production by catalytic reforming of crude ethanol over a commercial catalyst in packed bed tubular reactor”, The 19th Canadian Symposium on Catalysis, May 2006 (Poster), Saskatoon, Canada (A. Akande, A. Aboudheir, R.Idem).
  22. “Performance of Ni catalysts supported on CeO2-, La2O3-, ZrO2-, Al2O3 and their combinations for hydrogen production by partial oxidation of isooctane”, The 19th Canadian Symposium on Catalysis, May 2006, (Oral Presentation), Saskatoon, Canada (H.H. Ibrahim, R.Idem).
  23. “Influence of composition and characteristics on activity of Ni catalysts supported on Ce, La and Zr-doped Al2O3 for hydrogen production by partial oxidation of diesel”, The 19th Canadian Symposium on Catalysis, May 2006, (Oral Presentation), Saskatoon, Canada (N. Okochi, R. Idem).
  24. “Development of advanced catalyst system for high temperature water-gas-shift (WGS) reaction for hydrogen production from reformate gas”, The 19th Canadian Symposium on Catalysis, May 2006, (Oral Presentation), Saskatoon, Canada (P. Kumar, R. Idem).
  25. “The effects of mass transfer parameters on the modeling of a PEM fuel”, EIC climate change technology conference, May 2006, ( Mahinpey, A. Jagannathan, R. Idem, A. Aboudheir).
  26. “Numerical modeling of the cathode catalyst layer of a PEM fuel cell”, The 55th Canadian Chemical Engineering Conference, October 16-19, 2005, Toronto, Canada ( Mahinpey, A. Jagannathan, R. Idem, A. Aboudheir).
  27. “Experimental, kinetic, and numerical modeling of hydrogen production by catalytic reforming of crude ethanol over commercial catalyst in a packed-bed tubular reactor and packed bed membrane reactor”, NHA Hydrogen Conference, March 29-April 1, 2005, (Poster) (A. Aboudheir, A. Akande, R. dem).
  28. “Kinetics and reactor modeling of hydrogen production by partial oxidation of gasoline in a packed-bed tubular reactor”, The 54th Canadian Chemical Engineering Conference, October 3-6, 2004, Calgary, Alberta, Canada (H.H. Ibrahim, A. Aboudheir, R. Idem).
  29. “Modeling and simulation of a packed bed reactor for hydrogen production by methanol-steam reforming”, Hydrogen and Fuel Cells, September 25-28, 2004, Toronto, Canada (A. Aboudheir, R. Idem).
  30. “Kinetic and reactor modeling of hydrogen production by the catalytic reforming of crude ethanol in a tubular packed bed reactor”, Hydrogen and fuel cell futures conference, September 12-15, 2004, Perth, Australia, (A. Akande, A. Aboudheir,R. Idem, A.K. Dalai).
  31. “Optimization of Ni/Al2O3 catalysts for hydrogen production by partial oxidation of gasoline, The 18th Canadian Symposium on Catalysis, May 16-19, 2004, Montreal, QC, Canada (H.H. Ibrahim, R. Idem).
  32. “Steam reforming of non-purified ethanol”, The 18th Canadian Symposium on Catalysis, May 16-19, 2004, Montreal, QC, Canada (A. Akande, R. Idem, A.K. Dalai)
  33. “Effects of preparation procedure on the activity of Ni/Al2O3 catalyst in the partial oxidation of hexadecane to produce hydrogen”, The 18th Canadian Symposium on Catalysis, May 16-19, 2004, Montreal, QC, Canada (A.T. Fatokun, R. Idem).
  34. “Processing of non-purified ethanol from a glucose fermentation process for solid oxide fuel cell application”, The 6th International Conference on Greenhouse Gas Control Technologies, October 1-4, 2002, Kyoto, Japan (R. Idem, H.H. Ibrahim, P. Tontiwachwuthikul, M. Wilson).
  35. “A Novel method for evaluating the kinetics of N-heptane induced asphaltene precipitation from various saskatchewan crude oils”, The 52nd Canadian Chemical Engineering Conference, October 20-23, 2002, Vancouver, BC (H. H. Ibrahim, R. Idem).
  36. “Relationship between crude oil-asphaltene characteristics and asphaltene precipitation behavior for various Saskatchewan crude oils”, The 52nd Canadian Chemical Engineering Conference, October 20-23, 2002, Vancouver, BC, Canada (H. H. Ibrahim, R. Idem).
  37. “Synthesis and characterization of a novel methanol-steam reforming catalyst”, The 219th ACS National Meeting, Symposium on Novel catalyst synthesis and characterization techniques, March 26-30, 2000, San Francisco, CA, USA (R. Idem, N.N. Bakhshi).
  38. “Performance of Co-Ni/ZrO2 and SO42--TiO2 catalysts in a dual-bed reactor for the selective production of C4 hydrocarbons from syngas”, The 217 th ACS National Meeting, March 21-25, 1999, Anaheim, CA, USA (A. K. Dalai, R. Sethuraman, R. Idem, S. P. R. Katikaneni, R. V. Malyala, N. N. Bakhshi)
  39. “Modified Fischer-Tropsch synthesis for the selective production of C4 hydrocarbons using a dual reaction system: A comparative study of various solid acid catalysts”, The 15th Canadian Symposium on Catalysis, May 17-20, 1998, Quebec, Canada (A. K. Dalai, S.P. Katikaneni, N.N. Bakhshi, R. Idem, R. Sethuraman).
  40. “Selective production of C4 hydrocarbons from syngas over modified Fischer-Tropsch catalysts”, The 46th Canadian Chemical Engineering Conference, Sept 29-Oct 2, 1996, Kingston, Ontario, Canada, (R. Sethuraman, S. P. R. Katikaneni, R. Idem, N.N. Bakhshi).
  41. “Preparation, activation, characterization and performance evaluation of a novel Mn-promoted Cu-Al catalyst for the production of hydrogen from methanol”, The 46th Canadian Chemical Engineering Conference, Sept 29-Oct 2, 1996, Kingston, Ontario, Canada (R. Idem, S. P. R. Katikaneni, N.N. Bakhshi).
  42. “Kinetic modeling of the production of hydrogen from methanol over Mn-promoted coprecipitated Cu-Al catalyst”, The 14th Canadian Symposium on Catalysis, May 26-29, 1996, Whitsler, BC, Canada (R. Idem, N.N. Bakhshi).
  43. “Products of the thermal cracking of canola oil in the presence and absence of steam”, The 47th Canadian Chemical Engineering Conference, October 5-8, 1997, Edmonton, Alberta, Canada (R. Idem, S. P. R. Katikaneni, N.N. Bakhshi).
  44. “Hydrogenation of carbon monoxide for the selective production of C4 hydrocarbons using Fischer-Tropsch synthesis”, The 47th Canadian Chemical Engineering Conference, Oct 5-8, 1997, Edmonton, Alberta, Canada (A. K. Dalai, R. Sethuraman, S. P. R. Katikaneni, R. Idem, N.N. Bakhshi).
  45. “Synthesis and characterization of sulfated-titania super acid catalysts”, The 15th North American Catalysis Society Meeting, May 18-22, 1997, Chicago, IL, USA (S.P.R. Katikaneni, A.K. Dalai, R. Sethuraman, R. Idem, N.N. Bakhshi).
  46. “Kinetic modeling of the methanol-steam reforming process”, Saskatchewan/Manitoba Chemical Institute of Canada Symposium, Nov 3-4, 1995, Regina, SK, Canada (R. Idem , N.N. Bakhshi).
  47. “Studies of steam reforming of methanol over coprecipitated Cu-Al catalysts”, The 13th Canadian Symposium on Catalysis, May 24-May 27, 1994, Sarnia, ON, Canada (R. Idem, N. Bakhshi).
  48. “Performance studies of promoted coprecipitated Cu-Al catalysts for the methanol steam reforming reaction”, The 44th Canadian Chemical Engineering Conference, pp. 205-206, Oct 2-6, 1994, Calgary; AB, Canada (R. Idem, N.N. Bakhshi).
  49. “Studies on in-situ NOx reduction by the hydrogen production from methanol reaction intermediates over Mn-promoted coprecipitated Cu-Al catalyst”, University of Saskatchewan/Saskatchewan Power Corporation Research Program Technical Seminar, Dec. 12, 1994, Regina, SK, Canada (R. Idem, G. Chattopadhyaya, N.N. Bakhshi).
  50. “Steam reforming of methanol: Methods of improving the performance of coprecipitated Cu-Al catalysts”, Chemical Institute of Canada, Saskatchewan Symposium, Oct 28-29, 1994, Saskatoon, SK, Canada (R. Idem, N.N. Bakhshi).

 

Biomass

  1. “Hydrothermal gasification of flax straw in sub-critical water”, The 62nd Canadian Chemical Engineering Conference, October 14-17, 2012, Vancouver, BC, Canada (I. Harry, R. Idem, H. Ibrahim, A. Khan, R. Thring).
  2. “Potential of producing high octane additives and hydrogen from biomass-derived oils”, The 32nd Energy Convers. Eng. Conf., July 27-Aug 1, 1997, Honolulu, Hawaii, USA (S. P. R. Katikaneni, R. Idem, N.N. Bakhshi).
  3. “Potential of producing high BTU gas from various biomass-derived chars”, The 3rd Biomass meeting, August 24-29, 1997, Montreal, Quebec, Canada (R. Idem, S. P. R. Katikaneni, N.N. Bakhshi).
  4. “Effect of catalyst characteristics on the product distribution obtained from the catalytic upgrading of a biomass-derived oil”, The 3rd Biomass meeting, August 24-29, 1997, Montreal, Quebec, Canada (R. Idem, S. P. R. Katikaneni, N.N. Bakhshi).
  5. “Product distribution from the catalytic upgrading of a biomass-derived oil: Effect of catalyst functionality”, Annual AIChE Meeting (Alternative Fuels Session), Nov 16-21, 1997, Los Angeles, CA, USA (R. Idem, S. P. R. Katikaneni, N.N. Bakhshi, E. Hogan).
  6. “Catalytic conversion of canola oil: influence of catalyst acidity on product distribution”, The 14th Canadian Symposium on Catalysis, May 26-29, 1996, Whitsler, BC, Canada (S. P. R. Katikaneni, J. D. Adjaye, R. Idem, N.N Bakhshi).
  7. “Catalytic conversion of canola oil in a fluidized-bed reactor”, Developments in Thermochemical Biomass Conversion, May 20-24, 1996, Banff, AB, Canada (S. P. R. Katikaneni, J. D. Adjaye, R. Idem, N.N Bakhshi).